|
Name: | Stair Nosing |
Infill Material: | carborundum/rubber(PVC, EPDM) |
Surface treatment: | mill finish; anodized |
Color: | rubber stair nosing: black, brown |
carborundum stair nosing: red, black, blue, green, yellow, bronze, golden, vermillion, etc. |
Installation of stair nosings. |
Ensure that the stair surface is level and flat. |
Select the most suitable cartridge adhesive for interior/exterior usage. |
Ensure stairs are clean and free of debris, dust, grease and oil. |
Check the stair is dry and free from dampness |
Select the nosing carrier and check for the correct fit on the required stair. |
Do not apply the insert material at this stage. |
Carefully mark through the drill holes, ensuring that the nosing is tight against the riser, carpet or vinyl. |
Remove nosing from the stair, and drill and plug the tread ready for installation. |
Apply the adhesive to the underside of the nosing and replace on the step. |
Remove the nosing and allow the adhesive to cure for the recommended time. |
Replace and refit the nosing carrier to the stair tread, and screw down firmly. |
Ensure that the screws are flush to avoid “show through” on the insert material. |
Peel back the double sided tape, ensuring no dust or fibre is allowed onto the surface. |
Place insert material (smooth side down) into the channel from both ends and smooth into the middle of the profile. |
Features:
1. Slip Resistant
2. Durable
3. Impact Resistant
4. Low in Maintenance
5. Easy to Cut/Install
6. Corrosion Resistant
7. Light Weight
8. Low Conductivity
Stair nosing features
![]() |
Aluminum anti-skid stair nose step ceramic tile non slip Images |